DC / DC

Birgjar

Framleiðendur

Nýtt 5V Dual USB charger 3A Panel-mount slimline Stækka

5V Dual USB charger 3A Panel-mount slimline

PV USB-3 DUAL

PV USB-3 DUAL - Plug In DC/DC Converter, USB Charger, Fixed, 2 Output, 5 V, 3 A, 9 V

Slim line version for where rear space is limited.

Frekari lýsing

Kr 16.211

Ekki á lager

    For mobiles and tablets – The safe alternative for on board power

    The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems.The PowerVerter USB Chargers can be easily installed onto any vehicle and allow both drivers and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity on vehicles. The 5Volt DC power is much safer than mains, so installation is quick and simple. Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.

    The Range

    The PowerVerter USB chargers are available with either single or double outputs. The USB1 design is ideal for installation in dashboards, facia displays or underneath bus seats and is retained from behind with the threaded securing ring provided. The USB2 provides the same performance but is designed to be stored out of the way with other wiring. The USB3 design offers a slimline alternative and requires only 20mm rear space. This version is ideal for installation into seat backs, armrests or wherever space is an issue. Where rear access is limited, a front fixing retaining plate is supplied as an alternative. A protective installation pod is also available. This will accept both single and double USB chargers and is ideal for under seat installations on buses and coaches as well as retrofit applications where the vehicle is already in service.

    Commercial installations

    The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery. They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637- 2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.

    PV-USB3-DUAL

    Double output slimline 12/24-5V USB Charger 3.0A

    Diameter 36; Hole 30; Depth 20

    60g

     

    • Input voltage range 9-32Vdc
    • Output voltage 5Vdc +/- 0.1V
    • Output Power 2.1A (single) 3.0A (double - max 1.5A per socket)
    • Application Charges all USB devices including Apple and Android
    • Transient voltage protection Meets ISO7637-2 International standard for 12/24V vehicles
    • Output noise <50mV pk-pk
    • Off load current (quiescent current) <1.7mA
    • Power conversion efficiency 86%
    • Operating temperature -25°C to +30°C to meet this specification table
    • Storage temperature -25°C to +100°C
    • Operating humidity 95% max., non-condensing
    • Casework Black polycarbonate body
    • Connections Input: 6.3mm push-in flat blade connectors  Output: USB type A single socket/double socket
    • Output indicator Blue LED output indication
    • Mounting method 30mm diameter hole with or without bezel. USB2 for non through fitting applications.
    • Safe area protection:
    • Over Current:Limited by current sensing circuit
    • Over heat:Limited by temperature sensing circuit
    • Overvoltage and Undervoltage:Limited by sensing circuit
    • Reverse Polarity:Limited by sensing circuit
    • Transients:Protected by filters and rugged component selection
    • Catastrophic protection:Internal fuse
    • Approvals 2004/108/EC The general EMC directive
    • Regulation 10 The automotive directive
    • 93/68/EEC The CE marking directive
    • AESP5
    • Designed to EN50498, ISO 7637-2
    • Markings CE and E marked
    • IP Rating: IP30

     

Umsagnir

Skrifaðu umsögn

5V Dual USB charger 3A Panel-mount slimline

5V Dual USB charger 3A Panel-mount slimline

PV USB-3 DUAL - Plug In DC/DC Converter, USB Charger, Fixed, 2 Output, 5 V, 3 A, 9 V

Slim line version for where rear space is limited.

Skrifaðu umsögn

Nýjar vörur